Gyproc MF CURVE
Concealed grid MF curved ceiling system
Gyproc MF CURVE is a lightweight, non-loadbearing, suspended ceiling system for constructing curved ceilings and soffit linings. The linings are simple to install and provide non fire-rated solutions for all types of buildings.
Key facts
- Can be used on concave or convex structures
- Minimum radius 600mm
- Uses pre-formed curved support channel
- No board pre-wetting required
- Normal jointing techniques apply
- Can be used with all Gyproc, Gyptone and Rigitone boards
Application
A wide range of applications, for example receptions and communal areas. It can be used in conjunction with Gyproc perforated and non-perforated boards to create convex or concave ceilings to achieve the required radius.
Sectors
Commercial 
Education 
Healthcare 
Residential 
Hospitality Performances
Indoor Air Quality
Installation overview
Gypframe GA1 Angle is fixed at wall positions to the line of the curve.
Gypframe Soffit cleats are secured to the soffit using appropriate fixings.
Gypframe Soffit cleats are secured to the soffit using appropriate fixings.
Gypframe MF7 primary support channel -rolled to the required radius at site is installed over the Perimeter angle and secured to the hangers.
The ceiling sections are secured to the primary channels by screw-fixing.
Gypframe MF5 Ceiling Sections are run at right angles to the underside of the rolled support channel to form the secondary grid.
Gypframe MF5 Ceiling Sections are run at right angles to the underside of the rolled support channel to form the secondary grid.
Boards are fixed to the secondary grid to form single or double layer linings to the curvature of the grid.
