GypLyner UNIVERSAL
Metal framed wall lining system
GypLyner UNIVERSAL wall lining system is a cost-effective, virtually independent metal frame drylining. It is a general purpose system that is suitable for all internal non-loadbearing applications.
Key facts
- Commonality of ceiling and wall lining components.
- Minimal connection to the structure.
- Overcomes difficulties of background irregularities.
- Can satisfy thermal performance and acoustic requiements.
- Provides service void of 25mm - 135mm.
- Ideal for refurbishing existing walls where:
- Wall surface quality is poor.
- Acoustic or thermal upgrades are required.
- A cavity is required to accommodate services, such as water and waste pipes.
Application
Due to the design flexibility of GypLyner UNIVERSAL, this system can be tailored to meet the requirements of a wide rang of applications.
Sectors
Commercial 
Education 
Residential 
Hospitality 
Healthcare Installation overview
The required cavity depth up to a maximum of 85mm or 135mm is determined, and chalk lines marked to floor and ceiling to indicate positioning of the Gypframe GA1 Angle.
Brackets are then fixed into position.Gypframe GL1 Studs are installed in-line with the GLB85/GLB135 at 600mm centres and screw fixed using Gyproc Wafer Head screws to the GA1 Angle at the head and base.
Bracket legs are bent forward and each leg fixed to the Gypframe GL1 Studs.
The protruding bracket legs are bent back to sit clear of the channel face.
At internal angles, a Gypframe GL1 Stud is positioned tight into the corner to provide support for the lining.
Brackets are then fixed into position.
At internal angles, a Gypframe GL1 Stud is positioned tight into the corner to provide support for the lining.
Boards are screw-fixed to framing members to form the lining. Horizontal board joints should be backed with Gypframe GFS1 Fixing Strap or Gypframe 103 FC 50.
