GYPWALL ROBUST
GypWall ROBUST is a high impact-resistant partition system for use where a more durable structure is required. It provides a lightweight, cost-effective, non-loadbearing partition suitable for all types of commercial, healthcare and educational buildings.
GypWall ROBUST is a high impact-resistant partition system for use where a more durable structure is required. It provides a lightweight, cost-effective, non-loadbearing partition suitable for all types of commercial, healthcare and educational buildings.
Key facts
- High impact resistance
- Satisfies BS 5234 requirements to Severe Duty in a single layer
- Single layer system provides 60 minutes fire resistance
- System provides 70mm, 92mm and 150mm stud options
- Accommodates services within the stud cavity
- Achieves high levels of sound insulation with single layer
Application
Major circulation areas, for example corridors and stairwells
Sector
Gypframe Deep Flange Channel is fixed to the floor and soffit.
Gypframe studs are fitted vertically to a friction-fit at 600mm centres within the channel sections, and to abutments, to form the framework.
Additional framing is installed as required to support heavy fixtures.
Gyproc DuraLine boards are screw-fixed to framing members to form the lining.
Gyproc DuraLine boards are screw-fixed to framing members to form the lining.
Gyproc DuraLine boards are screw-fixed to framing members to form the lining. Horizontal board-end joints should be backed with stud nogging off-cut or Gypframe GFS1 Fixing Strap.
Gypframe Deep Flange Channel is fixed to the floor and soffit.
Gypframe studs are fitted vertically to a friction-fit at 600mm centres within the channel sections, and to abutments, to form the framework.
Additional framing is installed as required to support heavy fixtures.
Gyproc DuraLine boards are screw-fixed to framing members to form the lining.
Gyproc DuraLine boards are screw-fixed to framing members to form the lining.
Gyproc DuraLine boards are screw-fixed to framing members to form the lining. Horizontal board-end joints should be backed with stud nogging off-cut or Gypframe GFS1 Fixing Strap.