GYPROC MF CEILING
Gyproc MF is a suspended ceiling system suitable for most internal drylining applications. The fully concealed grid can be used in conjunction with Gyproc plasterboards, Rigitone or Gyptone boards to create a seamless, monolithic appearance.
Gyproc MF is a suspended ceiling system suitable for most internal drylining applications. The fully concealed grid can be used in conjunction with Gyproc plasterboards, Rigitone or Gyptone boards to create a seamless, monolithic appearance.
Key facts
Sector
Documents
Suspension from concrete soffit Gypframe GA1 Perimeter Angle is fixed to the wall at maximum 600mm centres.
Gypframe Soffit cleats are secured to the soffit at specified centres, using appropriate fixings, Gypframe GA1 Steel Angles are pre-cut and secured to the Gypframe soffit cleats.
Gypframe GA1 Steel Angles are pre-cut and secured to the Gypframe soffit cleats.
Fix hangers (two per fixing) to Gypframe MF7 Primary Support Channel using Gyproc Wafer Head Jack Point Screws.
Gypframe MF7 Primary Support Channels are installed over the Gypframe GA1 Perimeter Angles. Fix hangers (two per fixing) to Gypframe MF7 Primary Support Channel using Gyproc Wafer Head Jack Point Screws.
Gypframe MF5 Ceiling Sections are run at right angles to the underside of primary channels to form the secondary grid.
The ceiling sections are secured to the primary channels by using two Gyproc Wafer Head Jack-Point Screws.
Gyproc Boards are fixed to the secondary grid to form single or multi-layer linings as specified.
Suspension from concrete soffit Gypframe GA1 Perimeter Angle is fixed to the wall at maximum 600mm centres.
Gypframe Soffit cleats are secured to the soffit at specified centres, using appropriate fixings, Gypframe GA1 Steel Angles are pre-cut and secured to the Gypframe soffit cleats.
Gypframe GA1 Steel Angles are pre-cut and secured to the Gypframe soffit cleats.
Fix hangers (two per fixing) to Gypframe MF7 Primary Support Channel using Gyproc Wafer Head Jack Point Screws.
Gypframe MF7 Primary Support Channels are installed over the Gypframe GA1 Perimeter Angles. Fix hangers (two per fixing) to Gypframe MF7 Primary Support Channel using Gyproc Wafer Head Jack Point Screws.
Gypframe MF5 Ceiling Sections are run at right angles to the underside of primary channels to form the secondary grid.
The ceiling sections are secured to the primary channels by using two Gyproc Wafer Head Jack-Point Screws.
Gyproc Boards are fixed to the secondary grid to form single or multi-layer linings as specified.
This iconic tower soars to 160 metres above ground and has been entered in to the Guinness Book of Records as the world's most inclined building with a westward incline of 18 degrees.
The project consists of twin 25 story towers, located in the busy Salam Street area of Abu Dhabi city. One tower will be the headquarters of the Abu Dhabi Investment Council (ADIC), while the other will be the main office for the newly-established Al Hilal Bank
Masdar City is the world's first carbon-neutral, zero waste city with Masdar Institute of Science & Technology (MIST) being the first project to be completed.
