Gyproc MF Ceiling
Concealed grid MF Suspended ceiling system
Gyproc MF is a suspended ceiling system suitable for most internal drylining applications. The fully concealed grid can be used in conjunction with Gyproc plasterboards, Rigitone or Gyptone boards to create a seamless, monolithic appearance.
Key facts
- Monolithic appearance
- Suspension from concrete floors and purlins
- Durable ceiling lining
- Ventilation ducts and other services accommodated in plenum
- Simple accommodation of access panels
- Easy to create bulkheads and level change
Application
A wide range of residential and commercial applications.
Sectors
Commercial 
Education 
Healthcare 
Residential 
Hospitality 
Cinema 
Acoustic
Indoor Air Quality
Impact resistant
Fire Safety
Installation overview
Suspension from concrete soffit Gypframe GA1 Perimeter Angle is fixed to the wall at maximum 600mm centres.
Gypframe Soffit cleats are secured to the soffit at specified centres, using appropriate fixings, Gypframe GA1 Steel Angles are pre-cut and secured to the Gypframe soffit cleats.
Gypframe GA1 Steel Angles are pre-cut and secured to the Gypframe soffit cleats.
Fix hangers (two per fixing) to Gypframe MF7 Primary Support Channel using Gyproc Wafer Head Jack Point Screws.
Gypframe MF7 Primary Support Channels are installed over the Gypframe GA1 Perimeter Angles. Fix hangers (two per fixing) to Gypframe MF7 Primary Support Channel using Gyproc Wafer Head Jack Point Screws.
Gypframe MF5 Ceiling Sections are run at right angles to the underside of primary channels to form the secondary grid.
The ceiling sections are secured to the primary channels by using two Gyproc Wafer Head Jack-Point Screws.
Gyproc Boards are fixed to the secondary grid to form single or multi-layer linings as specified.
